1.Cemented Carbide Rolls
Cemented Carbide Rolls are produced by HIP, so that the residual pores within the rolls are almost
eliminated, thus the mechanical properties are improved, and its service life would belonger.
rolls for high-speed wire rolls for flux core welding wire
Application£ŗ
1.rolls for finishing or prefinishing stands in high-speed wire mills .
size scope: ¦µ150~300/¦µ80~160”ĮH70~100
2.rolls for cold rolled rebar
size scope£ŗ¦µ120~200/¦µ80~150”ĮH15~20
3.rolls for flux core welding wire
4.rolls for cold rolled strips or wire-flattening
5.rolls for reducing diameter of steel tube
2.carbide rotary cutters (CRC):
High performance carbide rotary cutters made of fine size grades has been appied in production of
sanitary articles. The service life between resharpening is about 12 million pads. CRC can be reground
for 7~8 times and its total serving life would be increased by 10~20 tines compared with steel cutters.
|
|
Primary properties of Cemented Carbide cutters
Component: WC90-Co10
density£¬g/cm3 : ”Ż14.4
hardness£¬HRA: ”Ż91.5
Bending strength£¬Mpa: ”Ż3300
| |
3.Cemented Carbide measuring balls
|
|
Cemented Carbide measuring balls
are used in sclemeter to measure hardness.
Common size : ¦µ2.5 ; ¦µ3; ¦µ5; ¦µ10
Tolerance: ”Ą¦µ0.001~0.0035
Hardness(HV): ”Ż1600 | |
4.Cemented carbide rectangular strip blanks
These carbide blanks are producedusing fine size grade alloy with 11% cobalt binder. Each blank is HIPed
and stress-relieved for EDM maching to used as punch dies.
Common size : 20~30”Į40~100”Į100~200
5.Other products:
Cemented carbide seal rings , nozzles, anvils, pressure vats, poles, valves and other large complex
components or dies.
Cemented carbide anvilsӢseal ringsӢnozzles Cemented carbide pressure vats
| |
